TM 53.94 Piston - Piston, Rings, Pin & Clips (KZ10B Standard) torsion For X30 pullers that have

For X30 pullers that have friction hubs with part number #X30125840

Hardware kit sold separately and can be found here

4 thou - your own hair follicle is 4 thou) this guarantee's consistency between engine to engine

and even smaller - 35" x 30" x 12" - with the removal of 2 bolts for the winch mount and 2 pins for the rear wheels

-Accurately measure fuel by volume AND weight

TM 53.94 Piston - Piston, Rings, Pin & Clips (KZ10B Standard) torsion For X30 pullers that haveTM Piston Kit include piston, ring, 2 circlips, and wrist pin. For use in the TM K9 B C KZ ICC Engines. When using, you must set the ring end gap to 0. 016" 0. 018". Please specify piston size when you order. A newer SwedeTech engine will have the piston size engraved on the outside of the cylinder, to the right of the exhaust port. You can also clean the top of the piston and look for the engraving, it should be on the intake side. Torque Specs 8mm